Ingrandisci
INFORMAZIONI SUL PRODOTTO
Material: Silicone
Use:
The Stamper is used for nail stamping, you must first have a nail stamping plate.
1. Rip the film on the stamp plate,
2 put a drop of glaze in the pattern you want, then use the scraper to place the nail polish evenly,
3. Press the stamp on the pattern and then print on your nails.
ADDITIONAL
| HEIGHT: | 180 cm - 5' 11” |
| BUST: | 83 cm - 32” |
| WAIST: | 57 cm - 22” |
| HIPS: | 88 cm - 35 |
| SHOE SIZE: | 39 - 6 |
Note: you can configure unique tab per product
CUSTOM TAB
LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt
- Machine wash
- Mashine wash, permanent press
- Machine wash, gentle or delicate
- Hand wash
- Do not wash
- 30°C or 80°F
- 40°C or 105°
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- 30°C or 80°F
- 40°C or 105°F
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- Do not wring
- Bleach if needed
- Do not Bleach
- Non-chlorine bleach if needed
- Non-chlorine bleach if needed
- Trumble dry
- Dry normal, low heat
- Dry normal, mediun heat
- Dry normal, high heat
- Dry normal, not heat
- Hanf to dry
- Drip dry
- Dry flat°
- Dry in the shade
- Don not dry
- Don not tumble dry
- Dry
- Do not dry Clean
- Iron any temp, steam
- Do not iron
- Maximum 110°C or 230°F
- Maximum 150°C or 300°F
- Maximum 200°C or 390°F
- No steam
- Dryclean
- Any solvent
- Except tetrachlorethylene
- Petroleum solvent only
- Wet cleaning
Note: you can configure same tab for all products at your store
RECENSIONI DEI CLIENTI
RELATED PRODUCTS
